Radio Shack 15-310 User Manual

7
Auto Code Search
AutoCodeSearchautomaticallysendsdevicecodesto
thedevicethatyouwanttocontrol.
1. Poweronthedevicethatyouwanttocontrol.For
VCRsandDVDplayers,youmustinsertatapeordisc.
2. Onyouruniversalremote,pressandholdSET,then
pressandholdadevicekey(TV,VCR/DVDorSTB/
CBL).Continuetoholddownbothkeysformorethan
threeseconds.TheredLEDashesandtheuniversal
remotestartssearching.Releasebothbuttons.
3. Whenthedevicerespondsinanyway(switches
off,play,pause,volumechange,channelchanges),
pressanykeyotherthanSETwithintwosecondsto
conrmthecode.TheredLEDwillstopashing.
4. Verifythesetupbytestingvariouskeysand
functions.PressGonyouruniversalremotetoturn
onthedeviceifitturnedoffinstep3.Ifsomeofyour
device’sfunctionsdonotrespondtotheremote,
repeatsteps2-4.
nNotes:
• BecauseAutoCodeSearchrequiresyoutostopthe
search, you must remain with the device during the
process.
• Tostopsearching,pressanykey(exceptSET). The
red LED light turns off and the search stops.
• Duringasearch,youcanpressSET to change search
direction from forward to backward or vice versa.

Radio Shack 15-310 Specifications

General

Brand	Radio Shack
Model	15-310
Category	Remote Control
Language	English