Radio Shack 15-310 User Manual

8
Manual Code Search
ManualCodeSearchsendscodestothedeviceyouwant
tocontrolonebyoneatthetouchoftheGbutton.
1. Poweronthedevicethatyouwanttocontrol.For
VCRsandDVDplayers,youmustinsertatapeor
disc.
2. Ontheuniversalremote,pressandholdSET,then
pressadevicekey(TV,VCR/DVDorSTB/CBL).The
redLEDlightsupandstayslit,indicatingtheremote
isinsettingmode.Releasebothbuttons.
n Note: Do not hold down the keys for longer
than three seconds or the remote enters auto search
mode.
3. PressGontheuniversalremote.Theuniversal
remoteentersmanualcodesearchmodeandthe
redLEDashes.
4. PressGrepeatedlyonyouruniversalremoteuntil
thedeviceturnsoff.(EachpressoftheGkeysends
adifferentcodetoyourdevice.)
Whenthedeviceturnsoff,thecodeiscorrect.Press
thedevicekeyonyouruniversalremotewithin10
secondstoconrmthecode.
5. PressG onyouruniversalremotetoturnyourdevice
backon.

Radio Shack 15-310 Specifications

General

Brand	Radio Shack
Model	15-310
Category	Remote Control
Language	English