Radio Shack 15-310 User Manual

6
TheredLEDlightsandstayslit,indicatingthatthe
remoteisinsetupmode.Releasebothbuttons.
n Note: Do not hold down the keys for longer
than three seconds or the remote enters auto search
mode.
4. Entertherst3-digitcodeforyourdeviceandbrand.
Pausebrieybetweeneachdigittomakesurethe
remotereceivesallinputs.TheredLEDashes
wheninputisreceived,thenturnsoffifyouentered
therightcode.IftheredLEDstayslit,enterthe
nextcodeforyourdeviceandbrand.Repeatforall
possiblecodesuntiltheredLEDturnsoff.
5. Verifythesetupbytestingtheremotecontrol’s
buttonsandfunctions.Ifsomeofyourdevice’s
functionsdonotrespondtotheremote,repeatsteps
3-5withanothercode.
nNotes:
• Ifyouwanttoquitduringdevicesetup,pressthe
device key or wait 10 seconds for the remote to exit
setup automatically.
• Ifyouareuncertainaboutyour3-digitcodeentry,
follow “Check Current Brand Code” on page 9 to confirm
your code.
• Ifyou’vetriedallthecodesforyourdeviceinthe
Code List and your universal remote still does not
work, follow steps for Auto Code Search or Manual Code
Search.

Radio Shack 15-310 Specifications

General

Brand	Radio Shack
Model	15-310
Category	Remote Control
Language	English