5
OPERATION
VOLUME
—
Rotate to turn your ra-
dio on and off and adjust its volume.
PTT
(Push to Talk) — To transmit,
hold down until appears,
then
speak into the microphone. Release
when you finish. BUSY appears
when a call is being received.
CALL
— Hold down to have a ring-
ing sound on all radios tuned to the
same FRS channel (and quiet code,
if one is used) as your radio.
Important:
The FCC does not allow
you to send a continuous tone for
more than 15 seconds at a time on
FRS frequencies. Do not hold down
CALL
for more than 15 seconds.
Note:
If the radio does not work,
hold down
CALL
while turning on the
radio to reset the radio. The radio
will be set to channel 1 and quiet
code 12, with the quiet and auto
power off features disabled (see
“Using the Quiet Feature” on
Page 6 and “Auto Power Off” on
Page 7).
VOLUME
PTT
CALL
MON
MIC/SPK
QUIET
CHANNEL
21-1811.fm Page 5 Thursday, August 5, 1999 3:01 PM
To Next Page
Loading...
Need help?
General
