6
The Basics
setting up your mixer
A sudden high output from the mixer could damage your
hearing or damage the audio devices connected to your
mixer. Before connecting to AC power, turn off your mixer
and all audio devices connected to your mixer.
connecting outputs
OUTPUT REC L/R — use an audio patch cord (not supplied) to connect
your tape deck’s line input jacks to your mixer (match left to left,
right to right). You can then record the mixer’s output.
OUTPUT AMP L/R — use an audio patch cord (not supplied) to connect
your receiver or amplifier to your mixer (match left to left, right to
right). The sound is output to your stereo sound system.
To Next Page
Loading...
