Chain Dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as
bank account information or access codes) from the directory, call log or
redial list.
To access a number in the directory while on a call:
Press MENU/SELECT twice to select >DIRECTORY.
Scroll to the desired entry by pressing or .
Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
Press MENU/SELECT and then press or to highlight >CALL LOG.
Press MENU/SELECT to select.
Scroll to the desired entry by pressing or .
Press MENU/SELECT to dial the displayed number.
To access the last number on the redial list while on a call:
Press REDIAL/PAUSE to dial. Press REDIAL/PAUSE again within two
seconds to cancel the chain dialing.
n Notes:
You cannot edit a directory entry while on a call. For more details about
the directory, see page 24.
You cannot copy a call log entry into the directory while on a call. For
more details about call log, see page 28.
If you press REDIAL/PAUSE while on a call, you can only view the most
recent call, and you cannot erase the entry. For more details about the
redial memory, see page 32.
Press and hold OFF/CLEAR to exit redial, directory or call log when you
are on a call.
1.
2.
3.
1.
2.
3.
4.
•
•
•
•
To Next Page
Loading...
