Copy a number from the redial list by pressing REDIAL/PAUSE and
then , or REDIAL/PAUSE to select a number. Press
MENU/SELECT to copy the number.
5. Press MENU/SELECT to move to the name.
The screen shows ENTER NAME.
6. Use the dialing keys (see “Character Chart” below) to
enter the name.
Press MUTE/REMOVE to backspace and erase a
character.
Press and hold MUTE/REMOVE to erase the entire entry.
Press to move the cursor to the left or to the right.
7. Press MENU/SELECT to confirm.
Character Chart
Use the dial pad and the chart below to enter a name (up to 15 characters).
Each press of a particular key causes the characters to be displayed in the
following order:
Number
key
Characters by number of key presses
1 2 3 4 5 6 7 8 9
1 1 # , , - . &
2 A B C 2 a b c
3 D E F 3 d e f
4 G H I 4 g h i
5 J K L 5 j k l
6 M N O 6 m n o
7 P Q R S 7 p q r s
8 T U V 8 t u v
9 W X Y Z 9 w x y z
0 0
* * ? ! / ( ) @
# space
n Note: When entering a name in the directory, the first letter of each
word is automatically capitalized.
•
•
•
•
ENTER NAME
_
ENTER NAME
_
To Next Page
Loading...
