Radio Shack 43-3901 - Caller ID Operation; Reviewing Call Records; Calling Back from Caller ID Memory

11
Caller ID Operation
IfyousubscribetoCallerIDservice,thephoneautomatically
displaysincomingcallinformationandstorestheinformation
inCallerIDmemory.Thesystemcanstoreupto99incoming
phonenumbersor64incomingnamesandphonenumbers.
Thephonecompanyalsosendsthecorrecttimebetweenthe
rstandsecondringstoupdateyoursystem’sdisplay.
Reviewing Call Records
RepeatedlypressUPorDOWN toreviewthenewcalls.Afterall
newcallshavebeenreviewed,END OF NEW CALL appears.
Toreviewalltherecordsfromoldesttonewest,pressUP.To
reviewtherecordsfromnewesttooldest,pressDOWN.After
reviewingallrecordsinmemory,END OF LIST appears.
• Ifanincorrect,invalid,orincompleteCallerIDsignalis
received,LINE ERROR appearsonthedisplay.
• Ifthenameandnumberarenotavailableduetothe
caller’srestriction,PRIVATE CALLappearsonthedisplay.
• Ifthenameandnumberarenotavailable,
--UNAVAILABLE--appearsonthedisplay.
• RPTappearswithanumberifyouhavereceivedacall
fromthesamephonenumbermorethanonce.
• Ifyoudonotpressabuttonwithinabout15seconds,the
systemautomaticallyreturnstothenormaldisplay.
Calling Back from Caller ID Memory
Option 1
1. Withthehandsethunguponthebase,pressUPorDOWN
buttontondthenumbertobedialed.
2. PressCALL BACKtwice.PICK UP CALL appears.
3. Liftthehandset,andthenumberisredialedautomatically.