Need help? Call
1-800-989-4706
17
Note:
If the code you entered is invalid, the
red light flashes for about 3 seconds.
5. Use the 6-in-1’s number keys to enter the
time you want to set. For example, if you
want to enter 15 minutes, press
1–5
.
When the red light blinks once, the 6-in-1
has accepted the code.
Note:
If the time you entered is invalid, the
red light flashes for about 3 seconds. Start
again from Step 1.
6. Press
ENT
on the 6-in-1. The red light turns
off.
To cancel the timer, press
Plug ’n Power
on the
6-in-1, then hold down
TIMER
until the red light
blinks.
15-1923.fm Page 17 Monday, July 19, 1999 12:41 PM
To Next Page
Loading...
