33
Operation
clicks to turn on the transceiver. The
transceiver sets the quiet tone code.
Note:
If the DIP switch setting is not
listed in the table on Pages 30–32,
no tone is set.
ˆ
Operation
Notes:
• You can only communicate with
another transceiver that is using the
same channel and/or the same quiet
tone code as your transceiver.
• Your transceiver’s range varies
depending on factors such as posi-
tion, terrain, and battery condition.
Buildings absorb transmitted signals
and, if they contain metal, might
19-1207.fm Page 33 Friday, November 10, 2000 11:04 AM
To Next Page
Loading...
