EasyManua.ls Logo

Radio Shack Discovery 200 User Manual

Radio Shack Discovery 200
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cat. No. 63-3007
OWNER'S MANUAL
Please read before using this equipment.
DISCOVERY 2000
Metal Detector
®
RadioShack™
Question and Answer IconNeed help?

Do you have a question about the Radio Shack Discovery 200 and is the answer not in the manual?

Radio Shack Discovery 200 Specifications

General IconGeneral
TypeVLF (Very Low Frequency)
Operating Frequency6.6 kHz
SensitivityAdjustable
DiscriminationYes
Search ModesAll Metal, Discrimination
Target IndicatorVisual and Audio
Headphone JackYes
Search CoilWaterproof
Audio OutputSpeaker, Headphone Jack
Power SourceTwo 9V batteries
BatteryTwo 9V

Summary

FEATURES

Core Features

Includes displays, audio, and auto notch for better target identification and junk rejection.

Design and Connectivity

Covers waterproof coil and headphone jack for versatile use.

OPTIONAL ACCESSORY

4-inch Searchcoil

Discusses a smaller searchcoil for tiny, shallow objects.

PREPARATION

Assembling the Detector

Step-by-step guide for putting the metal detector together.

Installing Batteries

Instructions on how to insert the required 9-volt batteries.

USING HEADPHONES

Connecting Headphones

How to plug headphones into the jack for private listening.

Traffic Safety

Warning About Headphones

Advises against wearing headphones in high-traffic areas due to hazards.

UNDERSTANDING THE DETECTOR

Displays Overview

Explains the function of the top and bottom displays on the control housing.

Top Display Ranges

Details the gold and silver ranges and metal identification indicators.

Tones

Describes the different audio tones for metal identification (low, medium, high).

OPERATION

Turning On the Detector

Steps for powering on the device and initial indicators.

Setting a Target Mode

Explains the three modes: ALL METAL, DISC, AUTO NOTCH.

ALL METAL Mode

Details how the ALL METAL mode functions.

DISC Mode

Explains the DISC mode and its function.

AUTO NOTCH Mode

Details how to set and use the AUTO NOTCH target mode.

TESTING AND USING THE DETECTOR

Indoor Testing

Procedure for testing the detector's response indoors.

Outdoor Testing and Use

Guide for testing and using the detector in outdoor environments.

Searchcoil Sweeping Hints

Tips for effective searchcoil movement to avoid false readings.

FALSE SIGNALS

Recognizing and Handling False Signals

Explains causes and how to identify repeatable signals.

FINE-TUNING THE DETECTOR

Adjusting SENSITIVITY

How to adjust sensitivity for optimal performance and reduced interference.

Adjusting DISC/NOTCH

How to adjust discrimination to ignore specific metal types.

PINPOINTING A TARGET

Target Pinpointing Technique

Steps to accurately locate buried metal targets.

TROUBLESHOOTING

False Signals

Addresses issues with false signals and their causes.

Incorrect Metal Type Display

Addresses issues with the display not showing the correct metal type.

CARE AND MAINTENANCE

General Care Guidelines

Recommendations for storing, handling, and cleaning the detector.

Resetting the Detector

Instructions on how to reset the detector if it malfunctions.

TREASURE HUNTER'S CODE OF ETHICS

Ethical Guidelines

Basic rules for responsible treasure hunting.

RadioShack Limited Warranty

Warranty Terms

Details the 90-day warranty, exclusions, and rights.

Related product manuals