13
UNDERSTANDING YOUR RECEIVER
Once you understand a few simple terms we use in this manual and familiarize
yourself with your receiver’s features, you can start using your receiver to listen to
the world!
POWER
— turns the receiver on and off.
— turns on the display light for about 12 seconds (if you installed batteries) or
until you press again.
— displays the time in your area using Daylight Saving Time.
SET
— lets you set the time.
STEP
— sets the tuning range for manual tuning (see “Direct Access Tuning” on
Page 19).
ATS/FM
— selects the FM band and lets you select FM stations using your receiv-
er’s automatic tuning system (ATS).
ATS/LW
— selects the LW (longwave) band and lets you select LW stations using
your receiver’s automatic tuning system.
To Next Page
Loading...
