45
RESETTING THE
DISPLAY
If the display shows random charac-
ters or does not work properly, you
might need to reset it.
Important:
This procedure clears the
set time and resets the receiver’s mi-
croprocessor (the component that
controls how the receiver operates),
but all stations remain stored. Reset
the receiver only when you are sure it
is not working properly.
To reset the display, insert a pointed
object, such as a straightened paper
clip, into the
RESET
hole on the bot-
tom of the receiver. Then gently press
and release the button inside the hole.
To Next Page
Loading...
