BG TECH.
VERSION III
2001/2/28
Press “F” + “TOT(4)”. The default setting OFF appears with TOT on LCD. Repeatedly press
key or channel rotary switch to select the desired time-out-timer interval from 1, 2, 3, 4,
5, 10, 15, 20 min. When you select a value for the time-out-timer feature, “TOT” appears on the
LCD. Press to store the setting and exit to the VFO mode.
When TOT is on, “TOT’ on LCD is blinking.
For instance, when it is set to 4 min, warning tone beeps at 3min 50 sec.
TURING THE WEATHER RADIO FREQUENCIES
Press to select weather band. Then, press to select your local weather channel.
Main channel display will show CH-01 and sub channel display will show WX.
When SAME is on, sub channel display will show SAME.
WEATHER SAME ALERT
Press to select SAME mode. Press up/down key to select weather SAME on or off. When
you set Weather SAME area code and weather SAME is on, the transceiver detect the SAME signal
and display in WX Channel as below
WARN for Warning
WATCH for Watches
STMT for Statement
TEST for Test
Umbrella icon appears when SAME mode is on.
It detects SAME code in selected weather Channel. During SAME code detects, audio is muted.
Main channel display shows the selected weather channel and sub channel display shows one of
alerts (WARN, WATCH, STMT or TEST) for 5 sec.
If area code is not designated, it will not detect 4 kinds of alert.
Area code can be input only in AREA mode on set mode.
(Reference of Area code at http://www.nws.noaa.gov/nwr/nwral.htm)
ELECTRONIC COMPASS
Press “F” + “COMP (H/L)” to see magnetic direction.
2 digits of direction such as SE, NW appear in the left and up to 3 digits of degree such as 360, 180,
To Next Page
Loading...
