BG TECH.
VERSION III
2001/2/28
don’t receive in signal, it goes to scan in sub. If pressing PTT, it transmits in last memory channel
before entering the dual watch mode and dual watch is canceled.
If “M” key is held down, it scans in sub frequency till "M" is released. If released “M” key, it waits
200 msec in main channel and back to the sub frequency.
The initial frequency in main and sub. is same.
RECEIVING AIR BAND
Select Air band frequency by pressing and tune the frequency you want to hear pressing
or rotate Ch rotary switch. When the mode is air band, “A” appears on the top of LCD.
The air band RX range is 108.000 ~ 136.9875MHz.
To Next Page
Loading...
