EasyManuals Logo

Radio Shack HTX-420 User Manual

Radio Shack HTX-420
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
BG TECH.
VERSION III
2001/2/28
Power Save conserves battery power when the transceiver is not transmitting or receiving.
Programmable Frequency Steps let you set the frequency increment for tuning or scanning to steps of 5,
6.25, 7.5, 10, 12.5, 15, 20, 25, 25, 50kHz.
Signal Strength Indicator a graduated bar shows the relative strength of the received signal.
Time-Out Timer lets you set a maximum transmission time interval among 1,2,3,4,5,10,15,20 minute.
Earphone Jack and External Microphone Jack let you connect an optional earphone, external
microphone, or combination headset for more flexible operation.
External Power Jack lets you use an external power source for maximum output.
Back Light makes your transceiver easy to operate in low-light situations.
Weather SAME Alert lets you watch specific area message from NOAA and listen to the weather
broadcast.
Auto Power Off lets your transceiver automatically turn off after a preset period of non-use.
Electronic Compass lets you know the directions.
Cross Band Operation lets you use the different frequency for transmitting and receiving.
Dual Watch let you watch two different channels.
Air band receiver lets you listen to air band broadcast.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Radio Shack HTX-420 and is the answer not in the manual?

Radio Shack HTX-420 Specifications

Frequency IconFrequency
2-Meter TX frequency range144–148 MHz
2-Meter RX frequency range137–174 MHz
70-cm TX frequency range438–450 MHz
70-cm RX frequency range420–512 MHz
Air Band frequency range108.000-136.9875 MHz
Weather Band channelsCH1–CH7
Operating Environment IconOperating Environment
frequency stability± 10 ppm
operating temperature range14° to 140° F (–10° to 60° C)
operating voltage rangeDC 5 V to 13.8 V
Receiver IconReceiver
circuit typeDual Conversion, Superheterodyne
1st IF frequency45 MHz
2nd IF frequency450 kHz
sensitivity0.2 µV For 12dB Sinad
distortion5% Max
S/N ratio34 dB Min.
Transmitter IconTransmitter
power output at DC 7.2 V3 W
power output at DC 13.8 V4 W
distortion (nominal)3%
deviation± 5 kHz Max.
S/N ratio32 dB
current drain at DC 7.2 V1200 mA
current drain at DC 13.8 V1500 mA
Weight and Dimensions IconWeight and Dimensions
weight with rechargeable battery11.46 oz (325g)
dimensions (HWD)4[1]/2 × 2[2]/5 × 1[1]/5 (122 × 61 × 31 mm)
impedance50 ohm

Related product manuals