Radio Shack In/Out Thermometer with Indoor Humidity Gauge - Resetting the Thermometer

16
Operation
Note:
If you do not press
MEMORY
again, the
MAX
or
MIN
information
appears for about 5 seconds, Then
the display returns to the current
temperature and humidity.
4. To clear the minimum/maximum
memory and reset it to the current
temperature, hold down
MEMORY
for
about two seconds. The display
resets and the current temperatures
and humidity appears.
RESETTING THE
THERMOMETER
If the thermometer stops operating prop-
erly, use a pointed object (such as a
straightened paper clip) to press
RESET
on the back of the thermometer.
63-1032.fm Page 16 Thursday, June 22, 2000 11:29 AM