Radio Shack In/Out Thermometer with Indoor Humidity Gauge User Manual

11
Preparation
3. Using a screwdriver, drive the screw
into the wall, letting the head extend
1
/
8
inch from the wall.
4. Align the keyhole slot on the back of
the thermometer with the screw
head, then carefully push the ther-
mometer onto the screw head and
slide it down into place.
Mounting the Outdoor Sensor
You need a nail, wood screw, or masonry
screw (not supplied) with a head larger
than the small loop on the wire bracket to
mount the outdoor sensor.
Outdoor
Sensor
Screw
Wire
Bracket
63-1032.fm Page 11 Thursday, June 22, 2000 11:29 AM

Radio Shack In/Out Thermometer with Indoor Humidity Gauge Specifications

General

Brand	Radio Shack
Model	In/Out Thermometer with Indoor Humidity Gauge
Category	Thermometer
Language	English