EasyManua.ls Logo

Radio Shack In/Out Thermometer with Indoor Humidity Gauge - Attaching the Stand

Radio Shack In/Out Thermometer with Indoor Humidity Gauge
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Preparation
You can also use a pass-through tube to
route the cord through a wall.
Cautions:
The outdoor sensor is permanently
attached to the thermometer. Do not
try to remove it.
Avoid routing the outdoor sensor’s
cord where it could be pinched or
cut.
Note:
Keep the thermometer and outdoor
sensor away from artificial sources of
heat or cold such as stoves, heating
vents, radiators, and direct sunlight.
Attaching the Stand
1. Flip up the two tabs on the stand.
63-1032.fm Page 8 Thursday, June 22, 2000 11:29 AM

Related product manuals