Radio Shack In/Out Thermometer with Indoor Humidity Gauge User Manual

9
Preparation
2. Insert the tabs in the matching slots
on the thermometer’s base until they
snap into place.
Note:
Make sure the flat side of the base
faces the front of the thermometer.
To remove the stand, gently pull it away
from the unit.
Mounting the Thermometer
You need a wood screw (not supplied)
with a head that fits in the keyhole slot on
63-1032.fm Page 9 Thursday, June 22, 2000 11:29 AM

Radio Shack In/Out Thermometer with Indoor Humidity Gauge Specifications

General

Brand	Radio Shack
Model	In/Out Thermometer with Indoor Humidity Gauge
Category	Thermometer
Language	English