EasyManua.ls Logo

Radio Shack MD500 - Playing Prerecorded Tunes

Radio Shack MD500
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Operation
3. Repeatedly press
VOLUME UP
or
VOL-
UME DOWN
to increase or decrease the
volume.
Notes:
The keyboard’s volume ranges from 0
(no sound) to 10 (maximum), and the
current volume level appears on the
display. Each time you turn on the
keyboard, the volume is set to 6.
To quickly return to the default vol-
ume setting of 6, turn the keyboard off
then back on.
4. To turn off the keyboard, set
POWER
to
OFF
. The POWER indicator turns off.
PLAYING THE
PRERECORDED TUNES
You can listen to any of the 50 tunes that
come prerecorded in the keyboard, or you
can turn off a tune’s melody or accompani-
ment and play along on the keyboard.
Playing Back a Prerecorded Tune
1. Press
SONG
.
621*
and the number of
the current tune appears.
Note:
The keyboard always selects the
tune “Canon” (No. 01) each time you
turn it on.
2. Choose a tune from the SONGS list and
enter its two-digit number on the key-
pad.
Or, you can press
or
+
to move to the
next higher or lower numbered tune.
Notes:
Precede a single-digit number with a
0. For example, to select 06
(“Wiegenlied (Schubert)”), press
0 6
.
If you enter an incorrect first digit,
repeatedly press
+
or
to move to the
next higher or lower numbered tune.
3. Press
START/STOP
to start playing the
tune.
You can change the tune by repeating
Step 2 even while a tune is playing. The
new tune immediately begins to play. As
it plays, the display shows:
a “score” to show you the notes that
are playing (right side of the display)
a “keyboard” to show you the finger-
ing and which keys are pressed (bot-
tom of the display)
the black dots above the metronome
show the beat count in the measure
the chord name (center left of the dis-
play)
Note:
Each tune plays a different preset
tone for the melody.
4. Use
VOLUME
to adjust the volume as
desired.
5. To change the tempo, repeatedly press
TEMPO UP
or
TEMPO DOWN
. The current
tempo setting appears.
6. To select a different tune, repeat Step 2.
To stop the tune completely, press
START/STOP
.
Using DEMO
To play the prerecorded tunes one by one (in
order from the selected starting point), press
DEMO
. To stop the demo, press
DEMO
again.

Related product manuals