Radio Shack NWR-SAME Weatheradio - Page 16

16
Programming the Weatheradio‚
selects ALL LOCATION the first
time you turn it on.
SINGLE LOC — The
Weatheradio

receives a SAME
alert signal for one FIPS code
programmed in memory location 1.
MULTIPLE LOC — The
Weatheradio

receives a SAME
alert signal for up to 10 FIPS codes
programmed in multiple locations
in the Weatheradio’s

memory.
1. Press MENU. Then press e or d
until
AREA SELECT appears.
2. Press g. The currently selected
FIPS mode (
ALL LOCATION, SINGLE
LOC
, or MULTIPLE LOC) appears.
3. Repeatedly press e or d until the
desired FIPS mode appears. Then
press g.
If you select
ALL LOCATION, the radio
beeps and
AREA SELECT appears.
You will now receive all SAME alert
signals within a 50-mile radius.
If you select SINGLE LOC or MULTIPLE
LOC
and have not programmed the
Weatheradio

with a FIPS code,
LOC1 ------------appears.
Otherwise, LOC and FIPS codes
All manuals and user guides at all-guides.com
all-guides.com