What to do if my Radio Shack PRO-2048 is on but will not scan?
If your Radio Shack Scanner is on but not scanning, ensure the SQUELCH is correctly adjusted by turning it clockwise. Also, make sure you have stored frequencies into more than one channel. If the issue persists, you might need to reset the scanner's display.
Why is my Radio Shack PRO-2048 Scanner not turning on?
If your Radio Shack Scanner is completely inoperative, first ensure it is properly connected to a working AC or DC power outlet. Also, check that the adapter’s barrel plug is fully inserted into the DC 12V jack.
General| Modulation Modes | AM, FM, WFM |
|---|---|
| Scan Rate | 50 channels per second |
| Priority Channels | 1 |
| Display | LCD |
| Step Size | 5, 12.5 kHz |
Selectable normal or Hyper speeds for scanning and searching.
20-channel storage banks and priority channel settings.
Data skip, monitor memories, and search skip functions.
How to connect the scanner to a power source.
Using the supplied AC adapter.
Using a DC cigarette-lighter power cable.
Description of the Volume and Squelch knobs.
Indicators for MON, BANK, SCAN, MANUAL, PROGRAM, P, CH, MHz.
Indicators for PRIORITY, LOCKOUT, DATA, DELAY, WX, SEARCH.
Organizes 200 channels into 10 banks of 20 channels.
Temporarily stores frequencies found during searches.
Steps to turn on the scanner and adjust volume/squelch.
Searches for active transmissions within a specified frequency range.
How to listen to stored monitor frequencies.
Transferring frequencies from monitor memory to channels.
How the scanner scans programmed channels.
Manages which banks are scanned.
How to select a specific channel without scanning.
Sets specific channels to check frequently during scans.
Adds a delay to prevent missing replies on channels.
Prevents scanning of unwanted channels.
Adjusts speed for scanning and searching operations.
Skips non-modulated or data signals during searches.
Lists US/Canadian weather and Ham radio frequencies.
Lists common frequencies for VHF and UHF activities.
Details frequency step intervals for different band types.
To Next Page