28
Beyond the Basics
band search
setting a search band
The scanner can search up to 14 separate frequency ranges
to help you discover new stations in your area. To set up a
search band, enter into the band search mode.
Band Frequency Range (MHz) Mode Step Display
1 25.0000 - 27.9950 AM 5 kHz 25-28
2 28.0000 - 29.7000 FM 5 kHz 28-30
3 30.0000 - 49.9950 FM 5 kHz 30-50
4 50.0000 - 54.0000 FM 5 kHz 50-54
5 108.0000 - 136.9875 AM 12.5 kHz 108-137
6 137.0000 - 143.9950 FM 5 kHz 137-144
7 144.0000 - 147.9950 FM 5 kHz 144-148
8 148.0000 - 174.0000 FM 5 kHz 148-174
9 400.0000 - 419.9875 FM 12.5 kHz 400-420
10 420.0000 - 449.9875 FM 12.5 kHz 420-450
11 450.0000 - 469.9875 FM 12.5 kHz 450-470
12 470.0000 - 512.0000 FM 12.5 kHz 470-512
13 806.0000 - 823.9875
849.0125 - 868.9875
894.0125 - 956.0000
FM 12.5 kHz 806-956
14 1240.000 - 1300.000 FM 12.5 kHz 1240-1300
1. Press SRCH. The upper and lower limits of the bands
currently selected appear.
2. Press
e or d to select the band you want to search.
After about 2 seconds, the scanner will begin searching
that band, or press HOLD/RESUME to begin immediately.
You must set the search bands prior to any searching.
Notes
To Next Page
Loading...
