31
Beyond the Basics
After storing the frequency, it moves to the search hold
mode.
If there is no free channel, the frequency you want to
store will automatically be stored in the fi rst channel in
the selected bank.
4. Press HOLD/RESUME to resume searching.
delay
To help prevent missing a reply on a specifi c channel or
frequency, you can program a two second delay into any
channel, frequency, service band or band search. When scan
or search stops on a channel or frequency, there is a two-
second pause before the scanning cycle resumes.
To activate the delay feature (in either scan mode or search
mode):
Scan mode - For highway scan mode or private scan mode,
when in hold mode, select the desired frequency or channel
and then press DELAY. Or when the scanner stops on an
active frequency or channel, quickly press DELAY before it
continues scanning again.
Search mode - while searching press DELAY. DLY appears
on the display.
To Next Page
Loading...
