21
Direct Search
When you listen to a channel, you can search up or down from the cur-
rently displayed frequency.
-d-
appears on the display during a direct
search.
1. Press
MANUAL
, the channel number, then
MANUAL
to select a fre-
quency stored in a channel.
2. Press
t
or
s
to search up or down from the selected frequency.
3. When the scanner stops on a transmission, press
MONITOR
to
store that frequency in the current monitor memory. Or, press
t
or
s
to continue the search.
4. To hold the frequency, press
LIMIT
.
-h-
appears on the display.
To exit the hold mode and resume the direct search, press
LIMIT
again.
Notes:
• You can press
t
or
s
during the hold mode to step through the
frequencies toward the upper or lower limits.
• If you tune to a search skip frequency, the display shows
L/O
(see “Search Skip Memory”).
20-509.fm Page 21 Wednesday, August 4, 1999 1:58 PM
To Next Page
Loading...
