23
MANUALLY SELECTING A CHANNEL
You can continuously monitor a specific channel without scanning. This
is useful if you hear an emergency broadcast on a channel and do not
want to miss any details — even though there might be periods of si-
lence — or if you want to monitor a specific channel.
Follow these steps to manually select a channel.
1. Press
MANUAL
.
2. Enter the channel number.
3. Press
MANUAL
again.
Or, if your scanner is scanning and stops at the desired channel, press
MANUAL
one time. (Pressing
MANUAL
additional times causes your
scanner to step through the channels.)
To resume automatic scanning after manually selecting a channel,
press
SCAN
. Your scanner then scans through all non-locked channels
in the activated banks.
20-509.fm Page 23 Wednesday, August 4, 1999 1:58 PM
To Next Page
Loading...
