Radio Shack PRO-668 - Editing Objects Manually; Recording and Playback

20 21
Recording and Playback
Your iScan contains a 2GB MicroSD card that can store over
50 hours of recording time. After you activate the recording
feature, you can record all transmissions for specific objects
and transmissions found during a search.
Toenabletherecordingfeature:
1. Press MENU to access the main menu.
2. Select Settings and press .
3. Select Enable Record and press .
4. To record during frequency searches, select Search
Record and press .
5. Select Save Changes and press .
6. Edit the object and activate the Record setting. See
"Editing Objects Manually" on page 20.
Toplaybackrecordings:
1. Press MENU to access the main menu.
2. Select Playback and press .
3. Press /II to play the file.
4. You can press MENU for a list of playback options:
• MainMenu – Returns to the main menu.
• Back – Returns to the list of recorded files.
• PlayFromHere – Plays the current recording and
all recordings afterwards.
• DeleteAll – Deletes all recorded audio files.
• DeleteEarlier – Deletes recorded audio files prior
to the selected audio file.
• DeleteLater – Deletes the selected audio file and
all recorded audio files after the selected file.
5. Press SKIP to stop playback.
Editing Objects Manually
1. From the main menu, select Browse Objects.
2. Use the four-direction pad to select an object.
NOTE: Your iScan organizes imported objects beginning at
Playlist 151, named by service. Playlist 1 may be empty.
3. Press MENU to enter the Object Edit menu:
Frequency
The frequency for the object.
AlphaTag
The display name for the object.
SetPlaylists
Assign the object to playlists.
RxMode
Receiving mode
SqMode
Squelch mode
SqSearch
Activates a search for the Squelch code
SqCode
Squelch code
SqExclude
Excludes squelch
LockedOut
Locked objects are not scanned.
Skipped
Skipped objects are not scanned.
Priority
Priority object are checked more frequently.
Delay
Set a scan delay after a transmission ends.
Attenuate
Applies attenuation to the object
AGC
Reduces interference from strong local
transmitters (conventional frequencies only).
Alarm
Select a sound used for alarms.
Light
On, Off, or Flash.
FlashPattern
Alert LED flash pattern.*
OnTime/Off
Time
Flash pattern step duration. (Percentage: 100
= 1 second, 50 = 1/2 second).
LEDEnabled
Enables the Alert LED.
LEDFlash
Enables Alert LED flash patterns.
ColorCount
The number of Alert colors. 0 = off.
Color1-4
Hexidecimal value for each color.
Record
Record received transmissions.
( = Record this object)
DeleteObject
Deletes the programmed object; the
frequency remains in the iScan library for later
programming, if desired.
5. Use the four-direction pad and SEL button to change
settings. ( = selected)
6. Select Save Changes and press SEL.
Previous
Next
ForwardRewind
DRAFT
DRAFT