7
Installing a Battery
Installing a
Battery
Your meter requires one 9V battery (not
supplied) for power. For the best perfor-
mance and longest life, we recommend a
RadioShack alkaline battery.
Caution:
Use only a fresh battery of the
required size and recommended type.
Follow these steps to install the battery.
1. Press both sides of the battery com-
partment cover and lift it.
Note:
The battery compartment cover
cannot be removed.
2. Place the battery in the compartment
as indicated by the polarity symbols
(+ and –) marked inside.
3. Close the cover.
Press both
sides
33-2050.fm Page 7 Monday, April 17, 2000 2:04 PM
To Next Page
Loading...
