Radio Shack Telephone Interface II Assembly Instructions

Desk may be assembled with drawer mounted in
4 positions as illustrated below.
Fe Aa EY EH
FIG. 1 FIG. 2 FIG. 3 FIG. 4
T e Assemble (Figure 1) per illustration on fac-
Ing page.
2. Assemble (Figure 2) per illustration on fac-
ing page except mount drawer assembly
in holes in legs closest to top.
3. To assemble desk with drawer assembly on
left hand side (Figure 3 and 4) leave legs
oriented as shown, then: (Figure 5)
1. Rotate Box 180° (opposite as shown)
2. Rotate top 180° (opposite as shown)
3. Mount modesty panel to other end
of legs
Totally modular design
Radio Shack’s newest System Desk is
beautifully matched to Model Il. Its large
drawer stores your diskettes, program
binders and more. The photo and box at
left show assembly options. Take your
pick, but don’t be without this ‘finishing
touch”’ for your Model Il system.
Y
~
~
:
\

Radio Shack Telephone Interface II Specifications

General

Brand	Radio Shack
Model	Telephone Interface II
Category	Desktop
Language	English