Radioddity CB-500 - Page 9

8
LCD display Function detail Setting details
VOX sensitivity
level setting
: ~
Default :
VOX delay time
setting
: ~
Default
:
Talkback level
setting
, ~
Note : when the function is activate,
press and hold the PTT switch then
press
/ keys on the unit to
crease / decrease the volume level of
the TALKBACK.
Time out timer
, ~ Min
Default :
ANL/NB lters
setting
: turn off the lters (default)
: turn on ANL lter (In AM mode
only)
: turn on NB lter
: turn on ANL + NB lters
HI-CUT lter
setting
: turn off HI-CUT lter (default)
: turn on HI-CUT lter
RX noise
reduction level
setting
: , ~
Default :
TX noise
reduction level
setting
: , ~
Default
:
ECHO function
setting
: turn off ECHO function (default)
: turn on ECHO function