11
4.2 LCD Display
Icon Description
RSSI Squelch Open/ Close Indicator
Transmit power level indicator, According to Power (High/Low)
Make sure you can hear the DTMF side tone from the radio speaker, set to DT-ST, ANI-ST, DT+ANI.
Enables access of repeaters in VFO/Frequency Mode. TX will be shifted higher in frequency than RX
。
Enables access of repeaters in VFO/Frequency Mode. TX will be shifted lower in frequency than RX
The confidential calling feature is activated
Indicates active band or channel
Battery Level Indicator
When the battery level indicator reads the battery is depleted. At this point the radio will start beeping periodically as
well as flash the backlight of the display and when voice prompts are enabled, a "Low Voltage" announcement will be heard,
indicating that you need to change your battery or put your radio in the charger.