Why can't others hear my transmission on Radioddity Two-Way Radio?
If others can't hear your transmission on your Radioddity Two-Way Radio, it might be because your CTCSS or DCS settings don’t match theirs; in this case, change your CTCSS or DCS setting to match your peers. Alternatively, you may be too far apart. Try moving closer to improve communication.
What to do if the LED indicates reception, but the speaker is silent on Radioddity PR-T1 Two-Way Radio?
If your Radioddity Two-Way Radio's LED indicates reception but the speaker is silent, the volume may be too low. Try turning up the volume. Also, check if CTCSS or DCS is enabled. If so, change your CTCSS or DCS settings to match those you're trying to communicate with, or turn CTCSS or DCS off.
General| Brand | Radioddity |
|---|---|
| Model | PR-T1 |
| Category | Two-Way Radio |
| Language | English |
To Next Page
