Need help?Do you have a question about the Radioddity PR-T6 PMR EU and is the answer not in the manual?
General| Frequency Range | 446.00625-446.09375MHz |
|---|---|
| Channels | 16 |
| Power Output | 0.5W |
| Channel Spacing | 12.5kHz |
| Operating Voltage | 3.7V |
| Antenna Impedance | 50Ω |
| Operating Temperature | -20°C to +60°C |
| Battery Type | Rechargeable Li-ion |
| Waterproof Rating | IP54 |
| CTCSS/DCS | Yes |
| VOX | Yes |
| Scanning | Yes |
| Keypad Lock | Yes |
| LED Flashlight | Yes |
| FM Radio | Yes |
| Battery | Li-ion |
| Range | Up to 5 km |
| Battery Life | Up to 12 hours |
Lists the PMR446 frequencies for each of the 16 channels.
Summarizes the key functionalities and capabilities of the PR-T6 radio.
Instructions for recharging the Li-Ion battery pack using the desktop charger or wall adapter.
Instructions for recharging optional NI-MH batteries, including charging time.
Steps to attach, remove, and reinstall the belt clip for accessing the battery compartment.
Detailed steps for removing and installing the battery pack from the device.
Identifies and explains the main buttons and components of the radio like Antenna, Display, and buttons.
Details on Speaker, Microphone, LED Flashlight, Belt Clip, and Ports (SPK/MIC, USB).
Explanation of the MONI, SCAN, PTT, and Emergency buttons and their functions.
Detailed explanation of icons and indicators on the radio's LCD screen.
Fundamental steps for operating the radio, including power, volume, and talking.
Enables listening for weak signals on the current channel.
How to automatically scan through channels to find active transmissions.
Procedure for scanning CTCSS/DCS sub-codes to find matching privacy codes.
Instructions on how to use the built-in LED flashlight, including modes.
How to activate the emergency alert function for signaling help.
Steps to choose and set the desired operating channel for communication.
How to select CTCSS tones or DCS codes for group communication.
Enabling and configuring the Voice Operated Exchange feature for hands-free operation.
How to select and transmit distinct call tones to alert other users.
Selecting the type of emergency alert to send to group members.
How to enable or disable the audible beep sound when pressing buttons.
Configuring the end-of-transmission tone that signals the other party.
Enabling and configuring the dual watch feature to monitor two channels simultaneously.
Recommendations for keeping the radio in good working condition and avoiding damage.
Statement confirming the radio's compliance with EU directives and regulations.
To Next Page
