9
2) By pushing the or button the display will show CTCSS (ct blinking) or DCS (dc blinking); press /MENU
to enter the CTCSS or DCS tones. Now select the desired tone with the
or buttons.
3) Press the PTT button to exit menu or
/MENU button to continue set up.
VOX function
Radioddity PR-T6 enables hands free conversations through VOX function.
1) To activate VOX function press the
/MENU button 4 times and ‘VOX’ will appear on the display.
2) Use the
or buttons to select the desired setting:
The VOX sensitivity can be set in 3 different levels:
• 1 = high sensitivity (normal voice with no background noise)
• 2 = Medium Sensitivity for most environments
• 3 = low sensitivity (useful in very noisy areas or if you talk loudly)
3) Press the PTT button to exit menu or
/MENU button to continue set up.
To disable the VOX function follow the instructions above and select option oF (OF: Disabled).
Setting and Transmitting Call Tones
Radioddity PR-T6 can transmit different call tones to other radios in your group so you can alert them that you want
to talk. Your radio has 10 call tones for you to choose from.
To select the call tones:
1) Press the
/MENU button 5 times and " " will appear on the display.
2) Press
or to change and listen to the call tone.
3) Press the PTT button to exit menu or
/MENU button to continue set up.
• To disable the Call Tones follow the instructions above and select option oF (OF: Disabled).
In order to transmit your call tone to other radios, set up the same channel and Sub-Code on your radio and press
the
/CALL button.
Emergency alarm type
With the emergency alert feature, you can signal to your group members that you need help. The alarm signal can
only be signaled that you need help by pressing and hold the
button after the emergency alarm function of the
PR-T6 is activated.
Select an emergency alert type:
1) To activate emergency alert function press the
/MENU button 6 times and until the display shows “ ”.
To Next Page
Loading...
Need help?
General
