5
LCD DISPLAY
Basic Operations
In order to get the most out of your new radio, read this reference guide completely before attempting to operate
the unit.
Power on/off and volume adjustment
To turn the radio on, keep pressed the /CALL button.
To adjust the volume level as you prefer, press the
or button.
In case the radio does not pick up any signal, activate momentarily the Monitor function that allows to detect also
weak signals. Then, adjust the volume to the desired level.
To turn the radio off, keep pressed the /CALL button until a switch off tone is heard.
Keypad Lock
To avoid accidentally changing the radio settings, press the /MENU button for 3 seconds. The icon will
appear on the display. [PTT],
, [ /CALL] and [MONI] keys will still be active. Repeat the same procedure to
unlock the keypad.
Talking on Your Radio
To talk to others using the radio:
2. Activate the VOX function
4. Select the DCS/CTCSS type of squelch method
7. Emergency alert function activated
11.
Transmit power indicator. Low power only in PMR mode
12. Displays the set CTCSS tone or DCS code (CTCSS:
1-50; DCS: 1-105)
To Next Page
Loading...
Need help?
General
