13
• VFO/MR Key
In standby mode, press the key to switch between frequency (VFO) mode and channel (MR) mode.
To save frequencies to channel memory you must be in Frequency (VFO) mode. Memory mode is sometimes also referred to
as Channel mode.
• A/B Key
A/B (appears on the display): press to select the desired frequency (VHF or UHF) in the main or secondary display.
• Numeric keypad
With these keys you can input the information or your selections on the radio. In tx mode, press the number keys to send a
corresponding DTMF code.
• Star * Key
A short momentary press of the key enables the reverse function.
If you press this key for more than 2 seconds you will lock/unlock the keypad.
• Pound # Key
Press the
key to activate the DTMF dial function.
Press and hold the
key to activate the channel scan or frequency scan function.
In FM radio mode, press the
key to automatically search for broadcast programs.
• 0 key
Press and hold the [0
SQL] key to activate the NOAA weather forecast reception function
To Next Page
Loading...
