Radioddity GC-5 Series - Page 32

29
To return to the standby mode, press key.
6.9.8 Power On Password (Power On Password) - Menu 43
With this Menu you can request the correct password when the radio is turned on.
In standby mode, press MENU + 43. The display will show "POWER ON PWD"
Press
key to enter the function. Press the / keys to enable/disable (ON/OFF) the power on password and confirm
with MENU.
To return to standby mode, press
key.
Enable the power-on password function. Each time the radio is turned on, it will display "Input Password" to prompt for
the correct password.
6.10 Reset - MENU 42
This transceiver has two Reset modes available: VFO and ALL.
• Reset VFO: all the settings except channels will return to the default settings.
• Reset ALL: all settings will return to the default settings.
Reset VFO
In standby mode, press
+ 42; the screen will display “RESET”.
Press
to enter the function. Press the / keys to select VFO, then press to confirm.
The display will show “Sure to reset？
”. Press again to confirm and the screen will display “Wait…”. Then, the
transceiver will turn off and reboot again.
Reset ALL
In standby mode, press
+ 42. The screen displays “RESET”.
Press
to enter the function. Press the / keys to select ALL, then press to confirm.
The display will show “Sure to reset？
”. Press again to confirm; the screen will display “Wait…”. Then, the transceiver
will turn off and reboot again.