Radioddity GC-5 Series - Page 31

28
In standby mode press + 18. The display will show “LANGUAGE”.
6.9.5 Working Mode (MDF-A) - MENU 24
The radio has four working modes available:
• Frequency mode (FREQ)
• Channel mode (CH)
• Channel name (NAME)
To shift from one mode to another one:
In Standby mode press
+ 24; select the desired working mode with the / keys.
Press
key again to confirm your selection.
6.9.6 Roger Beep, end Transmission Tone (ROGER) - MENU 36
Roger Beep can be enabled/disabled:
• OFF: Roger Beep disabled
• ON: Roger Beep tone at the end of transmission
In standby mode, press
+ 36; the screen will display “ROGER”.
Press
to enter the function. Press the / keys to select OFF/ON. Confirm your selection by pressing key.
To return to the standby mode press
key.
6.9.7 Power On Message (POWER ON MSG) - MENU 40
With this Menu you can customize the welcome message that appears on the display when the radio is switched on.
Choose amongst the following options:
• VOLTAGE (the power voltage is momentarily displayed)
• MESSAGE (welcome message)
• LOGO (Custom Pictures)
• MODEL NAME (the model name of the radio will be displayed)
In Standby mode press
+ 40. The display will show “POWER ON MSG”.
Press
key to enter the function. Press the / keys to select the desired option and confirm with MENU.