EasyManuals Logo

RadioLink PRM-03 User Manual

RadioLink PRM-03
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
RadioLink Electronic Limited
www.radiolink.com
Model: PRM-03
Dimensions: 27*13mm (1.06"*0.51")
Weight: 6g(0.21oz)
Compatible flight controller: Mini Pix/PIXHAWK/TURBO PiX/APM
Compatible receiver: R12DS, R9DS (Old version receiver: R10DS, R10D,
R9D)
Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9
PRM-03 can telemetry Speed, Rise, Throttle, Voltage, Longitude,
Latitude, Altitude, GPS, RSSI, Flight Mode, YAW, ROLL, PITC, Distance.
PRM-03 is compatible with 1 cell to 12 cells battery(3.7~50.4V).
Pay Attention: The old version AT9 and AT10 have to upgrade the
firmware when if use PRM-03 to telemetry OSD information. AT9 have to
upgrade firmware at least to the version V1.2.6(OSD) and AT10 have to
upgrade firmware at least to V1.0.6(OSD).
Connection
(1) Connect one end of the telemetry module PRM-03 to
R9D/R9DS/R10D/R10DII/R10DS/R12DS and the other end to battery if
you just need feedback battery voltage. Same function as RadioLink
PRM-01 if you connect like that.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RadioLink PRM-03 and is the answer not in the manual?

RadioLink PRM-03 Specifications

General IconGeneral
BrandRadioLink
ModelPRM-03
CategoryControl Unit
LanguageEnglish

Related product manuals