EasyManua.ls Logo

RadioMaster TX12 Quick Start Guide

RadioMaster TX12
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Skip to content
Manuals+
User Manuals Simplified.
Home » Radiomaster » TX12 Quick Start Guide
TX12 Quick Start Guide
TX12
Quick start guide
WWW.RADIOMASTERRC.COM
Contents [ hide
1 Introduction
2 Safety Information
3 Manual and firmware download
4 Important 
5 Remote control overview
6 Model selection and protocol selection
7 Specifications
8 Warranty and repair
9 Related Manuals:
Introduction
Thank you for purchasing the RadioMaster TX12 2.4g remote control system. The system is versatile
and can be used by beginners and professionals. In order to ensure the correct and safe use of this
product, please read this manual carefully before use. Due to constant improvements in software and
hardware this manual may change over time. The information contained in this manual is subject to
change without notice. Visit our website for the most up to date information.
TX12 remote control is suitable for all types of fixed-wing aircraft, gliders, helicopters, cars, boats,
robotics, multi-rotor aircraft and anything else you might create, if you can build it RadioMaster can
control it. The TX12 uses a powerful operating system called OpenTX, for more information visit the
links below.
-The RadioMaster team.
Safety Information
Many remote-control models are equipped with powerful motors and sharp propellers. When using or
maintaining models, proceed with caution. When performing assembly or maintenance, make sure to
disconnect the power to the model and remove the propellers.

Other manuals for RadioMaster TX12

Question and Answer IconNeed help?

Do you have a question about the RadioMaster TX12 and is the answer not in the manual?

RadioMaster TX12 Specifications

General IconGeneral
Channels16
Display128x64 Monochrome LCD
RF ChipCC2500
Transmitting Power100mW
Antenna Gain2dBi
FirmwareOpenTX / EdgeTX
TelemetryYes
Trainer PortYes
SD Card SlotYes
BacklightYes
Vibration AlertYes
SpeakerYes
Headphone JackYes
Battery2S LiPo or 2x 18650
Gimbal TypeHall sensor
Operating Voltage6.6V - 8.4V
USB PortYes (Type-C)
Module BayYes (JR/FrSKY)
Operating SystemOpenTX / EdgeTX
Battery Type2S LiPo or 2x 18650
Dimensions170 x 159 x 108 mm
Frequency Range2.400GHz to 2.480GHz

Related product manuals