Radius 350 - Storing Numbers in Two-Touch Memory; Making Calls from Two-Touch Memory; Storing Incoming;Outgoing Calls

14
- Press M1 to M8 button to dial out the number
To store a number into a two-touch memory button
10 memories can be stored into the 10 key pad buttons 1-0
- Press the STORE button in On-Hook mode
- Dial the number to be stored
- Press the SHIFT key followed by the desired memory
location 1 – 0
-
To make a call from a two-touch memory
In on-hook Mode
- Press the SHIFT key then the location key 1 – 0
- Then press ENTER button to dial out
In off-hook
- Press the SHIFT key then the location key 1 – 0
To store an incoming number on the caller ID list
- In on- hook or off-hook
- Press  (up) or  (down) button to select the number
- Press “STORE” button
- The display will show : XXXXXXX STORE NUMBER
- Select the desired memory location M1 to M8
To store an outgoing call number
- In on- hook or off-hook
- Press button
- Press  (up) or  (down) button to select the number
- Press “Store” button
- The display will show : XXXXXXX STORE NUMBER
- Select the desired memory location M1 to M8
To store a number during a conversation
- Press “Store” button
- The display will show : --------- STORE NUMBER
- Select the memory location M1 to M8