Radius 350 - Setting Up; Setting Language and Local Area Code; Setting Time & Date

8
1. Setting language
- Press and hold the ENTER Button for 4 sec.(On hook or
Off hook)
- The LCD will show : OPTIONS MENU  
- Press (Up) button
- The LCD will show : SET LANGUAGE
- Press ENTER to enter in to the menu
- Use (Up) or (Down) button to select the language
- Then ENTER button to confirm and set the language
2. Setting local area code
- Press and hold the ENTER button for 4 sec.(On hook or Off
hook)
- The LCD will show : OPTIONS MENU  
- Using (Up) or (Down) button go to “LOCAL AREA CODE
MENU”
- Press ENTER button to enter in to the menu
- The LCD will show : AREA CODE - - - -
- Use (Up) or (Down) button to set the area code digit by
digit, pressing ENTER to select
- Then ENTER button to confirm and set the area code.
3. Setting time & date
NB: if connected to a PABX system, some systems automatically
set date and time – please refer to the PABX user guide.
- Press and hold the ENTER button for 4 sec.(On hook or Off
hook)
- The LCD will show : OPTIONS MENU  
- Using (Up) or (Down) button go to “SET TIME/DATE”
- Press ENTER to enter the menu
- The LCD will show : TIME/DATE
- Use (Up) or (Down) button to adjust the correct hour /
Minute / Month / Day at the top of the LCD
- Then ENTER button to confirm and set the time and
Setting Up