This phone is equipped with Caller ID display and will record caller’s
phone numbers. Caller ID feature will function only if your telphone
line has this facility. For details, please consult your Technical team
or phone service provider.
If the number cannot be transmitted, the display will show the text
“–E—“ (error in Caller ID signal).
You can keep upto 70 incoming call numbers in the Caller ID memory.
When the memory is full, the oldest record will be deleted and replaced
by the new one.
- In on-hook or off-hook
- Press (up) / (down) END OF LIST
When there are new calls, the number of new calls will be displayed
in the “NEW XX”. This icon will continue to show untill the new calls
have been reviewed.
- In on-hook or off-hook
- Press (out) button
- Then press (up) / (down) END OF LIST
-
Press and hold (up) / (down) buttons for 3sec, then the call log
will be shown for every 0.5sec and will stop after you release the key.
- In on-hook
To Next Page
Loading...
Need help?
General