29
6.5 NOZZLE CLEANING
1. Detach the quick connect nozzle from the wand. Use the included nozzle
cleaning tool or a paper clip to loosen up any stuck particles in the nozzle.
Flush with water.
6.6 CLEANING WATER INLET FILTER
1. Check the screen filter periodically and clean if necessary.
6.7 SPARK PLUG SERVICE
Note
Do not rinse spark plug in water. Follow guidelines and be careful
not to overtighten the spark plug.
Recommended spark plug: F6TC
Check the spark plug gap and clean the carbon deposits at the bottom of the spark
plug.
Tighten 1/2 turn when installing a new spark plug.
Tighten 1/8 TO 1/4 turn when re-installing an old spark plug.
0.70-0.80mm
(0.028-0.031in)
To Next Page
