Do you have a question about the Rain Bird PC-206-PS and is the answer not in the manual?
Allows different watering frequencies for various yard areas using separate programs.
Enables setting watering schedules by specific days or intervals, adapting to restrictions.
Sets individual watering durations for each station based on landscape needs.
Allows setting up to three start times per day for each watering program.
Highlights features like digital accuracy, battery backup, and emergency program.
Guides on setting the current time and selecting program A or C.
Instructions for setting the day watering schedule for programs.
Details on configuring up to three start times per program.
Sets run time per station from 1 to 99 minutes.
Allows watering cycle or station to be manually started.
Cancels operations and turns system off during rain.
Guidance on selecting a location and physically mounting the timer.
Details on running sprinkler wire and general wiring considerations.
Illustrates connections for transformer, keypad, and station outputs.
Explains how to connect individual valve wires to the timer terminals.
Instructions for connecting the power transformer wires to the timer.
Details on installing a 9-volt battery for program backup.
Information on the pump start feature for PS model timers.
Step-by-step guide to set the current day of the week.
Instructions to set the current hour using military time.
Steps to adjust the current minutes for accurate time setting.
Procedure for choosing between program A and program C.
How to view the current time after completing programming steps.
Guidance on dividing yard areas for optimal watering with dual programs.
Detailed steps to set watering days on a specific day-of-week basis.
Guides on setting watering schedules using day intervals like every third day.
Detailed steps for configuring one, two, or three daily start times.
Instructions on how to remove a previously configured start time.
Step-by-step process for adjusting station watering durations (0-99 minutes).
How to disable a station from watering by setting its run time to '00'.
How to manually start a watering cycle or advance to the next station.
How to use the system off button to stop watering for rain or shutdown.
Explanation of timer behavior during power outages and battery backup.
Advice on optimal watering times and factors influencing station run times.
Guidance on preparing the timer for winter storage.
Outlines specific functionalities the timer does not support.
Lists common problems and their potential causes and solutions.