Why is my Rain Bird ST8-WiFi display frozen?
If your Rain Bird Timer's display is frozen and not responding to programming, it could be due to these reasons: * **Electrical Surge:** An electrical surge might have interfered with the timer's electronics. Unplug the timer for two minutes, then plug it back in. This may restore normal operation if there is no permanent damage. * **Reset Button:** Press and release the RESET button.
How to troubleshoot a blank display on Rain Bird ST8-WiFi Timer?
If your Rain Bird Timer display is blank, here are a couple of things to check: * **Power Supply:** Make sure the main AC power supply is securely plugged in and working properly. * **Power Supply Wires:** Verify the power supply wires are connected to the Timer '24 VAC' terminals, if you have an indoor model.
General| Type | Smart Irrigation Timer |
|---|---|
| Number of Zones | 8 |
| Wi-Fi Compatibility | Yes |
| Weather-Based Watering | Yes |
| Rain Delay | Yes |
| Cycle and Soak | Yes |
| Manual Watering | Yes |
| Power Source | AC Power |
| Mounting | Wall Mount |
| Battery Backup | Yes |
| Mobile App | Rain Bird Mobile App (iOS and Android) |
To Next Page
