To Next PageTo Next PageHow to fix a blank LCD display on a Rain Bird STP-600i Irrigation System?
If the LCD display on your Rain Bird Irrigation System is blank, check that the transformer is securely plugged in and the two-prong connector is connected. Also, ensure that the main AC power supply is working properly.
What to do if the Rain Bird Irrigation System LCD display is frozen?
If your Rain Bird Irrigation System's LCD display is frozen and the controller isn't accepting programming, an electrical surge may have damaged the controller's electronics. Unplug the controller for 3 minutes, then plug it back in. If there is no permanent damage, the controller should accept programming and resume normal operation.
General| Number of Zones | 6 |
|---|---|
| Connectivity | Wi-Fi |
| Weather-Based Scheduling | Yes |
| Material | Plastic |
| Mobile App | Yes |
| Mounting | Wall Mount |
| Smart Home Compatibility | Alexa |
| Operating Pressure | N/A (Controller only) |
| Flow Rate | N/A (Controller only) |
| Spray Pattern | N/A (Controller only) |
| Radius | N/A (Controller only) |
| Pop-up Height | N/A (Controller only) |
| Inlet Size | N/A (Controller only) |
Diagram and explanation of the STPi controller's buttons, dial, and display for user familiarity.
Understanding different screens displayed by the controller while in AUTO mode, including errors.
Diagnosing and resolving problems that prevent automatic or manual watering cycles from starting.
Diagnosing and resolving issues related to a blank or frozen LCD display on the controller.
Reference chart for programming zones, run times, watering days, and start time sequences.
