EasyManua.ls Logo

Rain Bird STP-900i - User Manual

Rain Bird STP-900i
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operation Manual
STPi Controller
English... Page 1
Manuel d’utilisation du
Programmateur STPi
Français... Page 19
Manual de instrucciones del
Programador STPi
Español… Página 37
Manual de Funcionamento do
Programador STPi
Português…Página 55
Manuale di funzionamento del
Programmatore STPi
Italiano… Pagina 73
400i · 600i · 900i
637589-01 Rev 1 (STP user manual (INTL)) source.indd 1 6/26/2008 2:19:03 PM

Table of Contents

Other manuals for Rain Bird STP-900i

Questions and Answers

  • J
    Jason GarnerAug 5, 2025
    How to fix a blank LCD display on a Rain Bird Irrigation System?
    • B
      Benjamin HensonAug 5, 2025
      If the LCD display on your Rain Bird Irrigation System is blank, check that the transformer is securely plugged in and the two-prong connector is connected. Also, ensure that the main AC power supply is working properly.
  • H
    Haley HamiltonAug 14, 2025
    What to do if the Rain Bird STP-900i LCD display is frozen?
    • I
      icareyAug 14, 2025
      If your Rain Bird Irrigation System's LCD display is frozen and the controller isn't accepting programming, an electrical surge may have damaged the controller's electronics. Unplug the controller for 3 minutes, then plug it back in. If there is no permanent damage, the controller should accept programming and resume normal operation.
  • C
    carrie89Oct 24, 2025
    Why won't my Rain Bird STP-900i Irrigation System start watering on automatic or manual?
    • P
      patrickmitchellOct 25, 2025
      If your Rain Bird Irrigation System isn't watering during automatic or manual cycles, first, ensure the main water line and all supply lines are open and functioning correctly. Verify that all field wires and master valve/pump start relay wiring are properly connected. Check for any broken, cut, or 'skinned' wires, replacing them if necessary, and ensure all wire connections are watertight. Confirm the dial is set to the AUTO position. If you have a Rain Sensor, it might be activated; wait for it to dry or disconnect it from the yellow terminals, replacing it with a wire connecting the two terminals. If you don't have a Rain Sensor, ensure the wire connecting the two yellow Rain Sensor terminals is intact. Finally, an electrical surge may have damaged the controller; press the reset button...

Summary

STPi Controller Operation Manual

STPi Controller Functions Overview

Set Controller Clock

Set Controller Date

Schedule Watering

Water Now Function

Rain Delay Function

Adjust Water Percentage

Normal Operation Display Screens

Normal Operation Display

Displays current time, next zone to water, and date/time of watering.

Watering Now Display

Shows current watering zone and remaining minutes in the cycle.

Rain Delay Display

Shows current time and remaining rain delay hours.

Error Detected Display

Indicates detected errors and shows the affected Zone #.

Mounting the Controller

Connecting the Power Cord

Master Valve or Pump Start Relay Connection

Connecting a Rain Sensor

Troubleshooting

Troubleshooting Watering Issues

Addresses problems with automatic and manual watering cycles not starting.

Troubleshooting Electrical Issues

Covers issues like a blank or frozen LCD display and programming errors.

Programming Chart and Start Times

Start Time Sequence Details

Explains the sequence of watering start times based on the number of daily cycles.

Waste Electrical and Electronic Equipment (WEEE) Directive

WEEE Disposal Information (English)

Instructions for proper disposal of old electrical equipment in compliance with European directives.

Declaration of Conformity

Rain Bird STP-900i Specifications

General IconGeneral
TypeSmart Irrigation Controller
Wi-Fi ConnectivityYes
Mobile AppYes
Number of Zones9
Weather-Based AdjustmentsYes
CommunicationWi-Fi
MaterialPlastic
ColorBlack

Related product manuals