What to do if my Rain Soft TC 50 V has poor water quality?
If you are experiencing poor water quality with your Rain Soft Water System, there are a few potential causes. First, the raw water source might have changed, requiring a new water analysis from your RainSoft dealer. Second, check if the bypass valve is closed; if not, close it. Finally, ensure the power supply is properly connected.
How to troubleshoot loss of water pressure in Rain Soft TC 50 V?
If you're experiencing a loss of water pressure with your Rain Soft Water System, the first step is to bypass the system. If the problem persists after bypassing, it is not related to a RainSoft product; check your water distribution system. If bypassing resolves the issue, contact your RainSoft Dealer for service. Another potential cause is low pressure to the unit.
How to fix Rain Soft TC 50 V Water System that regenerates at the wrong time?
If your Rain Soft Water System regenerates at the wrong time, it is possible that the computer is not set properly. Reset the time of day/hour of regeneration.
What causes constant flow to the drain in Rain Soft TC 50 V?
Constant flow to the drain in your Rain Soft Water System can be caused by foreign material in the valve, which requires cleaning by your RainSoft Dealer. Another possible cause is excessive water pressure; in this case, install a pressure regulator.
Covers safety, raw water testing, and pressure checks before installation.
Guides on selecting the site and installing the valve head assembly.
Details shutting off water and draining pipes before installation proceeds.
Instructions for connecting the yoke and setting the bypass valve.
Details connecting the drain line and installing the air gap for safety.
Instructions for installing the brine safety float into the brine tank.
General| Brand | Rain Soft |
|---|---|
| Model | TC 50 V |
| Category | Water System |
| Language | English |
To Next Page
